DAP Frigga Single active column PA system 1000W - black

The DAP Frigga is an active PA speaker system with one subwoofer and one column speaker, suitable for singer-songwriters, corporate presentations, mobile DJs, entertainment venues and bands. The system has three inputs: XLR microphone input with gain and clip indicator, XLR line input with passthrough and Bluetooth with TWS support. The mixed output combines all signals. The SUB level control and the master level control the balance and volume. Status LEDs indicate the status of the amplifier.
The Frigga has an active double 12 subwoofer with a built-in amplifier for the column speaker. The column speaker contains six 4" neodymium midrange drivers and a 1.5" neodymium compression driver. The built-in amplifier delivers 1000 W RMS (2000 W peak) over three channels. Two intermediate poles ensure that the set is height-adjustable for different setups.
The Frigga comes with cables, mounting poles and spacer and is available in black or white. Please note that microphone and line signals are not transmitted via Bluetooth when using TWS.

Features:
- 1000W RMS, max SPL of 134dB at 1m (column)
- Multifunctional setup with two height options for optimal coverage
- Bi-amp satellite
- Microphone, line and Bluetooth 5.0 inputs with TWS
- Cables, mounting poles and spacer included

Specifications:
RMS Amplifier Output Power: 1000 W
Peak Amplifier Output Power: 2000 W
HF Top Cabinet Power: 250 W
LF Top Cabinet Power: 250 W
Subwoofer Power: 500 W
Passive Output Connector: Speaker Terminal 4-pole
Main Outputs: 1
Main Output Connector: 3-pin XLR
Mono Inputs: 2
Mono Input Connector: 3-pin XLR
Total Harmonic Distortion (THD): < 0.3 %
Signal-to-Noise Ratio: > 105 dB
AD/DA Converter Sampling Rate: 48 kHz
Amplifier Technology: Class D / Class H
Speaker System: Active Subwoofer / Active Bi-amp 2-way Top
Speaker Sensitivity (1 W/1 m): 96 dB
Max. Sound pressure level Subwoofer at 1 m: 132 dB
Max. Sound pressure level Top cabinet at 1 m: 134 dB
DSP bitrate: 24 bit
Frequency range: 40 Hz - 20000 Hz
Woofer diameter: 12 "
Woofer voice coil diameter: 2.5 "
Woofer magnet type: Ferrite
Woofer top cabinet diameter: 4 "
Woofer voice coil diameter: 1 "
Woofer top cabinet magnet type: Neodymium
Horizontal speaker diameter: 1 "
Horizontal speaker voice coil diameter: 1.8 "
Woofer magnet type: Ferrite
Subwoofer horizontal radiation: 360 °
Subwoofer vertical radiation: 180 °
Top cabinet horizontal radiation: 110 °
Top cabinet vertical radiation: 30 °
Input voltage: 100-240 V AC 50/60 Hz
Power consumption: 1100 W
Power connection: Powercon in/out
Input voltage: 100-240 V AC 50/60 Hz
Power consumption: 1100 W

Dimensions:
Height of the Top Cabinet: 765 mm (30.118″)
Width of the Top Cabinet: 135 mm (5.315″)
Depth of the Top Cabinet: 200 mm (7.874″)
Height of the Subwoofer: 865 mm (34.055″)
Width of the Subwoofer: 430 mm (16.929″)
Depth of the Subwoofer: 485 mm (19.095″)
Weight of the Top Cabinet: 9.2 kg (20.283 lb)
Weight of the Subwoofer: 37 kg (81.571 lb)
Colour: Black