Arkaos Kling-Force LED Compact Plug and Play Kling-Net 8-output LED Strip controller. New product. (102300).
- New product. Stock clearance. (3)
Kling-Force LED is an interface intended for controlling LED strips. There are many LED strips available with varying densities, sizes and prices.
Kling-Force LED makes it very simple and affordable to control all of them with Arkaos software as a media server.
The Kling-Force LED has 8 outputs and is suitable for all popular LED strips. The device distributes 40 amps of current to the LED strips.
The device runs on external power, so the user can choose between 5 or 12 V, depending on the installation. At 5 V the power is a maximum of 200 W, at 12 V a maximum of 480 W. The interface automatically distributes the power without having to convert it. This prevents a lot of heat loss. The output voltage must always match the input voltage, because the interface cannot convert between 5 and 12 volts.
The interface also provides surge protection, which is activated if the output draws too much current or if, for example, a short circuit occurs. It is automatically detected whether the situation has been restored, after which the LEDs are automatically switched on again.
Kling-Force has 2 Ethernet connections that allow multiple interfaces to be linked together.
Kling-Force LED can power a maximum of 1600 (8 x 200) LEDs or 4800 (8 x 600) LEDs if they are connected directly to the power supply.
Each output is limited to 5 A, so the number of LEDs depends on the specifications of the LED strip.
- 8-output LED strip controller
- Suitable for all popular models
- 5 VDC up to 200 W (1600 LEDs) or 12 VDC up to 480 W (4800 LEDs)
- 2 ethernet ports
- Electrical safety
Specifications:
Control mode: Kling-Net
Input voltage: 5-12 V DC
Power consumption: 480 W
Output power (A): 40 A
Power connector in: Terminal
Power connector out: Terminal
Data connector in: RJ45
Data connector out: RJ45
Length (mm): 190mm
Width (mm): 130mm
Height (mm): 39mm
Weight: 0.48 kg
Housing: Metal
Color: Black