The Yaesu FT-4XE is a 2 meter/440 MHz frequency transceiver with three output power levels: 5, 2.5 or 0.5 watts, transmitting from 144 to 148 MHz and from 400 to 480 MHz. The reception coverage is 65-108 (FM broadcast band), 136-174 and 400-480 MHz. The FT-4XE is compact and light, yet robustly built. The loudspeaker delivers no less than 1 Watt of powerful, clear sound. The included 1750 mAh Li-ion battery pack can run for up to 15 hours (TX 5 seconds, RX 5 seconds, Standby 90 seconds). The SBH-22 3.5 hour fast charger is included. VOX operation is possible with the optional SSM-512B earphone microphone. Other features include: WX channels with 'severe weather' warning, PC programming (cable optional), transceiver to transceiver cloning (cable optional), keypad entry, FM broadcast receiver, Automatic Range Transponder System (ARTS) , CTCSS/DCS control , Busy Channel Lockout (BLCO), Auto Power Off and Transmitter Time Out Timer (TOT). Size: 5.33 x 8.89 x 3.05 cm (without buttons and antenna) 250 grams.
Powerful outputs
With a reliable 5-watt RF output power, this radio is sure to be heard. Never miss a call with one watt of crisp, clear audio output through the extra-large speaker on the front panel.
High capacity Li-ion battery
Packed with a powerful 1750 mAh Li-Ion battery pack, giving the radio over 9 hours of operating time. To ensure minimal downtime, the FT-4XE also comes with a 3.5 hour fast charger.
Versatile scanning options
Programmable VFO scan scans all channels in the desired frequency range. Memory scan allows scanning of user selectable frequencies. Priority Channel Scan can be used to scan memory channels while prioritizing one channel. Weather warning scan warns the user when severe weather is approaching.
PC programmable
The FT-4XE can be programmed directly from a PC, making all advanced installation functions a breeze using the optional software and SCU-59 programming cable.
More advanced features
This compact radio includes many advanced features including: transceiver to transceiver cloning with the optional SCU-36 cloning cable, equipped with FM band receiver, ARTS (Automatic Range Transponder System), DTMF control, CTCSS/DCS control, TOT ( timeout timer) and more.
Specifications:
- LCD Display
- VOX function
- DTMF function
- Battery capacity: Li-ion 1950 mAh (7.4 V)
- Accessory connector: 1-pin Yeasu connector (Y)
- Transmission mode: F2A / F2D / F3E
- CTCSS/DCS function
- Voice compander
- VFO split mode: Two different frequencies can be used, one for receiving and one for transmitting.
- Scan function
- New PAGER (EPCS): This new feature allows you to call only specific stations, using a pager code that combines two CTCSS tones
- Time-Out Timer (TOT): Set the transceiver to automatically return to receive mode after transmitting continuously for a specified period of time. The TOT function limits the accidental transmission of unnecessary signals and unwanted battery consumption.
- Busy Channel Lock-Out (BCLO): The BCLO function prevents transmission while a received signal is present that is strong enough to open the “noise” squelch
- Auto Power Off (APO): This feature helps prevent battery drain by automatically powering off the transceiver if there is no operation for a specified period of time.
- Emergency channel control (SOS function)
- Quick call key (QRK)
- Battery capacity: SBR-28LI Li-ion Battery Pack (7.4V 1750mAh)
- Length: 31mm
- Height: 89mm
- Width: 53mm
- Weight: 250 grams
-Antenna connector: SMA male
Ventes dans l'UE uniquement.
L'acheteur est responsable des exigences légales de son propre pays.
Une licence peut être requise pour l'utilisation de cet appareil.